Questions: 1800-914-9835
FRAMEITALL 101
•
The anchor joints in your kit are designed to grip the ground tight, so your
garden edging will stay put even with frozen heaving ground.
•
Our garden edging anchor brackets pivot 270 degrees,
allowing endless design options.
•
Your tool-free straight modular border kit can also be combined with our
tool-free curved border kits to create more interesting designs.
ASSEMBLY INSTRUCTIONS
STEP 2:
Drive the stake level with the top of the bracket so the cap can snap onto the stake. If you
have driven the stake too far into the ground, you can either pull the stake up a bit (enough
to put the cap) or simply apply gorilla glue to the cap onto the stake.
Continue doing the same to all the stakes.
STEP 3:
Finish off each end of your border using
the finishing sleeve to give your border
that clean finished look!
NOTE
:
If you are edging or bordering around a playground or garden that is enclosing itself,
you won’t need the finishing sleeves and extra stakes.
DID YOU KNOW?
You can stack your landscape edging higher to create higher borders or to
create levels and cascading features? Simply order additional tool-free boards and snap-lock
stacking brackets (your kits come with anchor brackets). The modular design of all Frame It All
products means that you can add, stack, re-design or re-purpose your materials any time the
mood strikes.
STEP 1:
Layout your timbers along the borderline and connect each
timber together by inserting the top of the stake through
the bracket loops with the stake pointing to the sky. This
enables you to freely position your border to get your
desired location
(refer to image on right )
.
When your desired location is achieved slide out your first
stake, flip it around and drive the stake point through
the bracket loops and into the ground.
A
B
B
A
