Customer Service: 1800-914-9835 | support@frameitall.com
ASSEMBLY INSTRUCTIONS
STEP 1
:
For 3 levels
, assemble 16 x Doubled-Bracket Timbers (
A
)
For 4 levels
, assemble 20 x Doubled-Bracket Timbers (
A
)
You will need 6 (
A
) Timbers for the 1
st
(base) level and 4 (
A
) Timbers for each levels.
STEP 2
: Layout the base level of your raised garden in a straight rectangular shape,
using 6 (
A
) timbers. Insert Stake through the hole of the bracket and into each of the
corners to lock all sides in place.
X 16
X 6
Use plugs
(included) to cover
the holes on both
side of timbers
Note:
If you plan to assemble raised bed on a hard surface, use
hacksaw to remove the spike of each stake. Use these cut
down stakes for the base level only of your raised garden.
Trim stake spike with
hacksawfor use indoor
or on hard surfaces
X 20
Attach one single stacking
bracket to each end of
timbers (
one facing up,
one facing down – shown
on the left
)
STEP 2a
: For one level,
add caps to each of
the top corner joints
to finish off the raised
garden and plugs to
cover the holes on
both side of timbers.
X 2
X 2
3 Levels ONLY
:
Assemble 2 x Singled-Bracket Timbers (
B
)
Assemble 1 x Cross-Bracket Timbers (
C
)
4 Levels ONLY
:
Assemble 4 x Singled-Bracket Timbers (
B
)
Assemble 2 x Cross-Bracket Timbers (
C
)
X 4
X 1
