Customer Service: 1800-914-9835 | support@frameitall.com
ASSEMBLY INSTRUCTIONS
STEP 1
: Assemble 20 x Doubled-Bracket
Straight
Timbers (
S
)
Attach one single stacking bracket to each end of timbers (both facing up – shown
below).
You will need 10 (
S
) Timbers for the 1
st
(base) level, 6 (
S
) Timbers for the 2
nd
level, 2
(S) timbers each for 3
rd
and 4
th
levels.
STEP 2
: Assemble 8 x Doubled-Bracket
Curved
Timbers (
C
)
Attach one single stacking bracket to each end of timbers (both facing up – shown
below)
You will need 2 (
C
) Timbers each for the base, 2
nd
, 3
rd
and 4
th
levels.
STEP 3
: Arrange 10 (
S
) and 2 (
C
) Timbers to create the base level of your garden in a
straight L- shape with the curved timber facing each end – shown below. Insert one
stake through the brackets and into each of the corners to lock all sides in place.
X 20
Note:
If you plan to assemble raised
bed on a hard surface, use
hacksaw to remove the spike of
each stake. Use these cut down
stakes for the base level only of
your raised garden.
Trim stake spike with
hacksawfor use indoor
or on hard surfaces
X 8
X 12
C
C
