background image

70001042-MD250, 71001042-MD350
72001042-MD550, 73001042-MD750                 
70002042-MD250, 71002042-MD350 
72002042-MD550, 73002042-MD750

Water Garden

Crooked Falls

Customer Service: 1800-914-9835 | 

support@frameitall.com

© Frame It All. All Rights Reserved.

1 LEVEL KIT CONTAINS:

3 x Composite Timbers 4

’ 

Curved

21 x Composite timbers 2

’ 

Straight

44 x Stacking Brackets

4 x 4-Way Bracing Brackets (1 Bag)

2 x Finishing Sleeves (1 Bag)

12 x Stacking Stakes (**See Note Below)

12 x Anchor/Ground Level Serrated Stakes

72 x Plugs/Locking Nubs

12 x Caps

2 x Rubber Liners (Pond/Waterfall)

2 x Underlayments (Pond/Waterfall)

1 x Water Pump

1 x Pump Tubing 

ASSEMBLY INSTRUCTIONS 

Building the Frame

STEP 1a: 

Assemble the curved timbers by sliding one end of the timber into the channel end of one 
of the brackets. Use plugs to lock the bracket in place.

Repeat this process on the other end of the timber flipping the bracket in the opposite 
direction. Make sure that all your curved timbers have brackets connected in the same 
way with relation to the curve.
(see example). 

Repeat for all curved timbers. 

How the Joints Work

Use plugs (included) 
to cover the holes on 
both side of timbers

STEP 1b.

For a 1 level pond design, connect a 2ft board with 2 x 4-way brackets as 

shown

and 2 

x 2ft boards with a 4-way bracket on one end and a normal bracket on the other end as 

shown

. For 2 level, double these board amounts.

(See example). 

**NOTE

Stacking stakes should only be used 
when stacking boards for water 
garden application.

ONLY

Stacking Stakes can stack!

Use plugs to 
cover the holes 

two plugs are 

required per 
bracket (1 on 
each side)

Use a Cap to
complete  the 
top level.

Use anchor 
stakes for 
ground level 
frames and 
stacking stakes 
for additional 
levels.

Use stacking  
stake when 
creating a multi-
level

STEP 1c.

Connect all other 2ft boards with brackets with each side having a bracket oriented the 
opposite way.

(See example). 

Repeat for all remaining 2ft timbers.

IMPORTANT: READ ALL 
INSTRUCTIONS BEFORE 
STARTING YOUR BUILD!

Required Tools:

Shovel

Levelling tool

Hammer 

Recommended Tools:

Pond Safe Foam 
Sealant

Grading Rake

2 LEVEL KIT CONTAINS:

6 x Composite Timbers 4

’ 

Curved

31 x Composite timbers 2

’ 

Straight

66 x Stacking Brackets

8 x 4-Way Bracing Brackets (2 Bags) 

2 x Finishing Sleeves (1 Bag)

24 x Stacking Stakes (**See Note Below)

12 x Anchor/Ground Level Serrated Stakes

112 x Plugs/Locking Nubs

12 x Caps

2 x Rubber Liners (Pond/Waterfall)

2 x Underlayments (Pond/Waterfall)

1 x Water Pump

1 x Pump Tubing

Summary of Contents for Crooked Falls

Page 1: ...h side of timbers STEP 1b For a 1 level pond design connect a 2ft board with 2 x 4 way brackets as shown and 2 x 2ft boards with a 4 way bracket on one end and a normal bracket on the other end as shown For 2 level double these board amounts See example NOTE Stacking stakes should only be used when stacking boards for water garden application ONLY Stacking Stakes can stack Use plugs to cover the h...

Page 2: ...e pond connects into the waterfall frame connect your 2ft boards assembled in Step 1b as shown STEP 4 Level your pond frame using a line level or a long level tool that can go across the entire length of the pond frame Level at several cross sections to level all boards of the frame STEP 6 Once again check the level of your pond edge and make any adjustments as needed STEP 7 Stack the additional l...

Page 3: ... piece and the waterfall frame This layer will protect your pond liner from stones or roots that may emerge over time STEP 5 Roll up any excess underlayment to the pond edge or trim it to size AFTER you have added water Note Trimming underlayment to size before adding water can result in your underlayment being pulled and not covering certain areas STEP 6 Place the pond liner over the underlayment...

Page 4: ... for 30 60 minutes Landscape Design Suggestions Move your excess soil up to your pond edge and take care to pack soil under any areas of the edge and then taper your soil grade down from the pond edge Raising your pond grade from the grade around will ensure lawn chemicals will not wash into your ponds water effecting the health of your fish and aquatic plants If you are looking to reduce the amou...

Reviews: