126 Merrimack Street, Methuen, MA 01844
Call 888.TV.FRAME | Main (978) 216-3115
Email info@MyFrameTV.com
FrameMyTV.com
Instructions
IR-2 Infrared Relay System
IR-2 Infrared Relay System Instructions
Operation of the Device
When the IR Relay System is initially connected
to a power source or switched on, the red power
light will illuminate and the blue light may flash
or appear off entirely if an infrared signal is being
detected in the room.
Anytime an infrared signal is received such as a
button press on your remote, the blue light will
illuminate as shown in the prior step to indicate
that an infrared signal is being received and is being
transmitted out the
Emitter Cable
that is covering
the TV’s remote sensor.
Powering Up:
Communicating with your TV
Note:
No programming of the IR Relay
System is required for this to device to work
with your television.
Additional instructions can be found at
http://FrameMyTV.com/Instructions
rame
