Construction and function
16
NOTICE!
Adhere imperatively to the storage indications exceeding
these requirements that are stated on the packages!
4.3 Equipment identification
The equipment identification is clearly visible on the nameplate
of the motor.
4.4 Disposal
Dispose of the motor in compliance with the regulations, but not
in the domestic waste. Framo Morat GmbH takes back and
recycles free of charge all motors, provided they have been
manufactured by Framo Morat GmbH and the customer delivers
them at the Framo Morat GmbH premises. If the national laws
in force require other services, we adapt our services in
compliance with these provisions.
5 Construction and function
The slip-on geared motors COMPACTA MRS12, MR30 and
AG160 are made of a motor block.
These motors are designed exclusively for integration in complex
plants whose intended use is not the conveying of living beings.
The manufacturer assumes no responsibility for the mounting in
compliance with the intended use. This responsibility lies with the
sole manufacturer of the plant.
5.1 Scope of delivery
The motors have been developed and manufactured under the
sole responsibility of Framo Morat GmbH.
Scope of delivery:
Element
Quantity
Motor
1
Mounting instructions
1
Technical data sheet
1
Electrical diagram
1
