Mounting
20
BEWARE!
Respect the correct screw length, since a wrong length
would damage the housing.
Type
Torque
Min. screwing
depth
Max. screwing
depth
MR6
14 NM
10 mm
15 mm
MS12
14 NM
10 mm
12 mm
MR30
25 NM
12 mm
15 mm
AG160
25 NM
12 mm
16 mm
(Table 1)
Mount the motor with the four screws, without mechanical tensions.
Comply with the above-mentioned torques.
BEWARE!
Risk of damages to the bearings and securing rings
– Do not mount attachments such as couplings or chain
wheels with the help of impacts or shocks.
Drive shaft forces
BEWARE!
Risk of damages to the drive shaft
– The authorised forces on the drive shaft can be found
in Table 2.
The following forces on the drive shaft are authorised:
Type
Radial load
Axial load
X
MR 6
1500 N
750 N
20 mm
MS12
1500 N
750 N
20 mm
MR30
2000 N
1000 N
20 mm
AG160
2000 N
1000 N
25 mm
(Table 2)