Setting
22
8
Setting
8.1 Setting MR 6
8.2 Setting
The slip-on geared motor COMPACTA type MR6 is supplied with
disengaged limit switches. There is no mechanical link between the
limit switches and the reduction gear.
The limit switch gear is adjusted at delivery so that the
corresponding limit switches are immediately close to the switching
position.
The switching cam is factory-positioned immediately before the
switching position. Switching (limit switches) takes place from the
inside towards the outside.
Limit switch coupling pin for direction of rotation 1, engaged
Limit switch coupling pin for direction of rotation 2, disengaged
Direction of
rotation 1
Direction of
rotation 2
Limit switch
switches from
inside towards
outside
Switching cam in switching
position
Setting dial for direction of rotation 2
Outside
Inside
Direction of
rotation 1
Direction of
rotation 2
