Setting
23
BEWARE!
Risk of damages to the motor.
– Comply with the maximum limit witch range stated in
the data sheet "Technical Data".
Proceed as follows for commissioning:
1. Move the motor to a limit position.
2. Press the coupling pin corresponding to the direction of
rotation down.
3. For the other limit position, engage the corresponding
coupling pin
The switching position can be corrected as follows:
1. Disengage the coupling pin corresponding to the limit
position to be corrected.
2. Move to the desired limit position with the motor.
3. Turn the setting dial until the limit switch is actuated.
4. Press the coupling pin down again.
A
Modify the switching point here
B
Disengaged: Pin up – in this position, the
switching position may be modified manually.
C
Engaged: Pin down – this is the operating
position. The cam is moved by the drive. The
drive stops when it reaches the set switching
point.
A
B
C
