background image

3 - Technical Information 

 

 
This product has been designed to operate in accordance with the product specification. The 

FR560RC searchlight has the following features: 
 

„

 

All marine grade materials and fixings;

 

„

 

Parabolic glass reflector;

 

„

 

Stove enamel painted;

 

„

 

385° horizontal rotation;

 

„

 

Vertical mo25° to -25°;

 

„

 

Motor speed 20

°

/sec fast, 10

°

/sec slow (Pan).

 

0-10

°

/sec fast, 0-5

°

 slow (Tilt);

 

„

 

Remote focus facility;

 

„

 

Thermostatically controlled internal heater.(Optional);

 

„

 

Toughened front glass;

 

 
 

The searchlight also performs to the following optical data: 

 
 

 

 

 

 

1000 Watt T/H   

 

 

„

 

Supply voltage 

 

 

220/240v or 110/115v   

 

„

 

Peak Beam Candlepower   

2,450,000 lux   

 

 

„

 

Range 

   1550 

metres 

   

„

 

Divergence 

   5° 

    

„

 

Operational temperature with heater  -50°C (-20

°

 without) 

 

 

 
In order that the searchlight operates correctly it is imperative that competent personnel are 

responsible for the installation, operation and servicing of this equipment. Failure to adhere to this 
advice may cause premature failure or incorrect operation of the searchlight, which may damage 

the equipment or cause personal injury. 

 

 
 
 
 
 
 
 
 
 
 

Back To Top

 

Summary of Contents for FR560




















Reviews: