3.6. Trouble Shooting
Situation
cause
-
Action
Fire difficult to start
Fire goes out
Wood green, too damp or poor
quality.
-
Use the recommended fuel.
Logs are too big.
-
To light the fire, use small, very dry twigs. To maintain
the fire, use split logs.
Air starvation.
-
Open lower spin wheel and top air control lever.
Insufficient draught.
þ
-
Check that the flue is not obstructed, sweep it if
necessary
-
Seek advice from a chimney specialist.
Fire burns too quickly.
Too much draught.
-
Ensure that the lower spin wheel is closed
-
Partially close the top air control lever.
Excessive draw.
þ
-
Install a draught stabiliser. Consult your Dealer.
Poor quality wood.
-
Do not continuously burn small wood, sticks, bundles,
carpentry offcuts (plywood, pallets), etc.
Smokes when lighting up.
Flue duct is cold.
-
Burn paper and kindling wood to increase heat.
Room is in decompression.
-
In houses equipped with mechanical ventilation, partly
open a window until the fire is well established.
Smokes while burning.
Draught is insufficien.
þ
-
Consult a chimney specialist.
-
Check that the flue is not obstructed, sweep if
necessary.
Down draught.
þ
-
Install an anti-down draught cowl. Consult your Dealer.
Room is in decompression.
þ
-
In houses equipped with Mechanical Ventilation, an
outside air intake must be installed for the chimney.
Low heat output.
Incorrect Fuels.
-
Use the recommended fuel.
Technical manual “701”
21
“Le Franc-comtois” - ref. 134 07 01
Instructions for user
þ
: This sign means that you should
asked for a qualified engineer to do the
work.