INSTRUCTIONS FOR USE
GENERAL INFORMATION
The product features LED lighting (6.5 W),
aluminium filters, an EC motor and the Easy
Clean system.
FUNCTIONS
A
B
C
D
E
F
Fig. 1
A.
Lighting
B.
Ventilation mode. The fan runs at low
speed for 60 minutes.
C.
Speed 1.
D.
Speed 2.
E.
Speed 3.
F.
1. Intensive mode. The fan runs at maxi-
mum speed for 7 minutes and then re-
verts to speed 3.
2. Filter monitor. If the filter monitor is
activated (see Programming below), the
LED will flash when the filter needs to be
cleaned. After cleaning, press and hold
button
F
for 2 seconds to reset the
system.
Turning on the cooker hood before you
start to cook prevents cooking smells
spreading into the room. Adjust the speed
of the cooker hood depending on the type
of food you are preparing. If possible, allow
the cooker hood to run at a low speed for a
few minutes after you’ve finished cooking.
You may also wish to run the cooker hood
on the low setting when the oven is in use
or after using the dishwasher.
The product is fitted with a filter monitor.
To activate/deactivate the filter monitor,
see below.
Programming
1.
Start programming: press and hold but-
tons A and B for 3 seconds so that they
both flash 3 times. Programming mode
will then be active for 30 seconds.
2.
Select function: press the button for the
selected function to activate/deactivate
the function.
Button
Functions
F
Filter monitor
The LED on the button lights up when
the function is activated.
3.
To save a programme: press and hold
buttons A and B for 3 seconds. Buttons
A and B will flash twice to show that the
programme has been saved.
Attention!
If the product has a cooker alarm or coo-
ker guard, see separate instructions.
CARE AND MAINTENANCE
Cleaning the filter
The cooker hood should be cleaned with a
damp cloth and washing-up liquid. With nor-
mal usage, the filters must be cleaned at
least every other month. Clean more often
after intensive use.
Fig. 2
991.0623.590/D000000006429/180007/2021-02-15
11
