1
1
2
1
Fig. 7
Refit the fan housing by inserting the sup-
ports in the rear of the fan (1). Bend up the
fan housing (2).Fig. 7
1
2
2
2
3
Fig. 8
Make sure all the snap retainers fit onto the
cooker hood lugs. Twist the fan housing (1)
into the lugs (2). Press the fan housing’s
snap retainer back into the lug (3).Fig. 8
Attention!
Check that the parts snap firmly into
place.
CHANGING THE CARBON FILTER
The carbon filter lasts for one to two years,
depending on the household’s cooking
habits.
3
2
1
1
Fig. 9
Push in the snap retainers on both sides of
the fan (1) and lift off the front (2). Then pull
out and lift off the filter retainer (3), Fig. 9.
1
2
Fig. 10
Undo the filter locks and replace the carbon
filter mat, Fig. 10.
Fig. 11
Refit filter locks, Fig. 11, filter retainer and
front in reverse order.
1
2
3
3
Fig. 12
991.0623.590/D000000006429/180007/2021-02-15
13
