8
18
-05.
907
a_GB
.f
m
16. Manual and Continuous Switch Setting
Manual switch setting:
Independent of the timer's programming, it is also possible to manually trigger a
switching process.
Continuous switch setting:
Independent of the timer's programming, it is also possible to set the switch output to
"on".
Manual and continuous switch setting off:
All switching processes are performed by the timer's program.
Manual and continuous switch setting can be set in the MANUAL menu or by pressing
the corresponding key combination.
A: Key combination for channel C1
B: Key combination for channel C2
16.1 Manual switching is activated by simultaneously pressing both keys.
16.2 Continuous switching is activated by simultaneously pressing both keys.
16.3 Manual and continuous switching is deactivated by simultaneously pressing both
keys.
17. PIN Code
The PIN code can be set in the OPTIONS menu.
18. External Input
The external input can be set in the OPTIONS menu.
Use a key without a glow-lamp trace.
19. Using a Memory Card
Avoid mechanical pressure or contamination when storing or transporting otherwise.
19.1 Insert the memory card into the timer switch.
19.2 Read the saved switching times, load them into or read them from the timer switch or
start the Obelisk program.
19.3 After completing programming, pull out the memory card and store it in the cover.
Summary of Contents for 4814 01 00
Page 17: ...17 18 05 907a_PL fm Notizen...
Page 18: ...18 18 05 907a_PL fm Notizen...
Page 19: ...19 18 05 907a_PL fm Notizen...
