background image

4

18

-05.

907

a_GB

.f

m

2. Key

Warning!

Failure to observe can result in injury or even death.

Caution!

Failure to observe can result in material damage.

 

Important!

Failure to observe can cause the product to malfunction. 

 

Useful information for optimally handling the product.

3.

Warranty

Liability is accepted according to the General Terms and Conditions of Business and 
Supply.
Use original replacement parts only!

4.

Important Notes

• Installation is to be performed only by a qualified technician according to the 

instructions provided and in accordance with legal requirements and acknowledged 
rules of technology.

• All technical connection regulations specified by the local electric utility companies 

must be complied with.

• The device is provided for mounting on 35 mm DIN rails (DIN EN 50 022).

• The device is to be used in closed, dry rooms only.

• The device must not be used on safety facilities (e.g. emergency exit doors, fire-

protection facilities, etc.).

• All rights reserved to make technical alterations.

5.

Application

Electronic contactor-timer with two channels, menu-guided display. 
84 memory locations for switch-on and switch-off times within the daily and weekly 
programs.
Switchable between summertime and wintertime mode. With 10 years reserve power in 
the event of a power outage. Easy to operate via 4 keys in a row with date-controlled 
holiday program, pulse program, cycle program and 2 additional external control 
inputs (keys, switches, inactive). Integrated operating hours meter, resettable and with 
a service function for monitoring maintenance intervals, 230 V AC.

Summary of Contents for 4814 01 00





















Reviews: