– 4 –
EN
Technical data
Operating data
Value
Operating pressure (ideal)
60 PSI
4 bar
400 kPa
Operating pressure (max.)*
115 PSI
8 bar
800 kPa
Operating pressure (min.)*
30 PSI
2 bar
200 kPa
Water temperature (ideal)
140°F
60°C
Water temperature (max.)
158°F
70°C
Hole Size For Faucet
1
3/8
“
35mm
INSTALLATION INSTRUCTIONS
1. Remove all contents from the package
and check for completeness.
2. Turn off water supply.
3. Cut a mounting hole 1 3/8“
diameter (35mm) in the desired mounting
surface (if one isn’t available).
4. Ensure Base O-ring (
2
) is in place in the
Faucet Base (
1
) (fig. 2A).
2A
2
1
5. Insert the Faucet into the hole, Hoses
first (fig. 2B).
ATTENTION:
Base-O-Ring (
2
) should
be sitting between the countertop and
Faucet Base.
DO NOT
use putty or other
sealant at this location.
NOTES:
Solid surface installation:
The
countertop mounting surface needs to be
flat and free of debris; otherwise the faucet
may not sit properly and could leak.
2B
3
5
6
4
Certifies this faucet complies with ASME A112.18.1 / CSA B125.1 & NSF 61, NSF 372 and
AB1953.
The faucet also complies with water usage requirements of the California
Energy Comission and the US Department of Energy.
Summary of Contents for CUBE FFPD3350
Page 23: ......
