1
2
3
4
5
6
8
7
6
Make sure water supply is turned off before maintenance.
Unscrew set screw (1) to remove lever handle. Unscrew the screw (2) to remove handle
extension (3). Lift off the dome (4) and the friction washer (5). Using a wrench unscrew the
cartridge nut (6) and remove. Remove the large O-ring (7) from the nut (6) and replace with new
O-ring. Remove the damaged cartridge (8) from the mixer body and discard cartridge.
Put the new cartridge into the body with the two positioning pins aligned with two seats (9) and
reassemble everything in the opposite sequence . Be sure to test for leakage.
9
9
7
Cartridge Replacement
3
