8. Cleaning and maintenance
The motor is permanently lubricated for life. Do not
attempt to lubricate your Disposer!
The disposer is self cleaning and scours itself with
each use.
Your disposer, except for the Batch Feed model, is
equipped with a removable splash guard for ease of
cleaning or replacement. Remove splash guard by pulling it
out from the top. To replace, simply insert into sink flange
and push down until properly seated.
NEVER pour bleach or chemical drain cleaners into the
disposer, as they cause serious corrosion of metal parts.
If used, resulting damage can be easily detected and all
warranties are void.
Mineral deposits from your water can form on the
stainless steel turntable of your disposer, giving the
appearance of rust. DO NOT BE ALARMED, the stainless
steel turntables used on models indicated in section 10
will not corrode.
9. Electrical information
Replacing the fuse in moulded plugs:
The correct fuse cover must be refitted when changing the
fuse. Remove the fuse cover and slide the fuse out.
Replace it with a 13 Amp ASTA fuse (approved to BS 1362).
Should the fuse cover be lost or damaged, an exact
replacement should be used. Never use the plug without
the fuse cover fitted.
IMPORTANT:
If the supply cord is damaged, it must be replaced by a
qualified person in order to avoid hazard.
Franke UK Ltd
West Park MIOC
Styal Road
Manchester M22 5WB
Tel: 0161 436 6280 Fax: 0161 436 2180
info.uk@franke.com www.franke.co.uk
Service & Spares:
UK Mainland & N. Ireland
Tel: 0845 050 8550 Fax: 0845 052 9011
franke@isdal.co.uk
Republic of Ireland
Tel: +353 1 413 6481 Fax: +353 1 413 6489
kalserve@kal.ie
FR020627 OWNERS GUIDE 16/5/06 4:38 pm Page 8
