Franklin Covey Palm V Handbook Download

Page: 84 / 241

Page 84

Chapter 4

6. Tap a blank area of the screen to deselect the event. A vertical line

appears next to the time, indicating the duration of the event.

Note:

If an event has the same start and end time, the time is
only displayed once.

To schedule an event for another day:

1. Select the date you want for the event by doing one of the

following:

„

Tap the day of the week that you want in the date bar at the top of

the screen. If necessary, tap the Previous week or Next week scroll
arrows to move to another week.

Tip:

You can also use the scroll button on the front panel of
your organizer to move forward or backward one day at
a time.

„

Tap Go To at the bottom of the screen to open the Go to Date

dialog box. Select a date by tapping a year, month, and day in the
calendar.

Tip:

In the Go to Date dialog box, you can also use the scroll
button on the front panel of the organizer to move
forward or backward one month at a time.

2. After you locate the date, follow the steps for scheduling an event

for the current day.

Previous
week

Next
week

Tap to select a day of
the current week

Previous year

Next year

Tap to select
current date

Tap to select a
month

Tap to select a
day

Summary of Contents for Palm V


















































































































































































































































Search results

Summary of Contents for Palm V

Reviews:

Related manuals for Palm V

Brands by name

Popular brands

Franklin Covey Palm V, Handbook

Search results

Summary of Contents for Palm V

Reviews:

Related manuals for Palm V

Brands by name

Popular brands