Introduction
These instructions detail how to replace the 7" LCD display (part #245-5004) and the
Interface Board (part #229073901 Rev. 4) for an EVO™ 550, EVO™ 5000,
EVO™ 600 or EVO™ 6000 Automatic Tank Gauge (ATG). Firmware 2.25.1 or greater
must be installed in the EVO™ 550 or 5000.
Replacement LCD Display Preparation Instructions
1. Make sure you have the parts, tools, and plan needed.
Parts:
• Replacement 7" LCD Display (245-5004)
• Interface Board (229073901)
• Phillips and flathead screwdrivers
2. The replacement LCD Display arrives in an antistatic bag
(Figure 1)
. Carefully remove the
Interface Board, LCD Display and cable to prevent damage
(Figure 2)
.
Figure 1
Figure 2
1
