4
Note
• You must have a fully charged battery the first time you use the R526.
• After the first use, you may use the device while it is connected to the AC adapter.
• When using battery power, the device lasts up to 3 hours (when connected to a
single device only).
• The battery will discharge more rapidly as additional devices access the R526.
2.2 Battery Tips
Warning
Use only Franklin Wireless approved batteries and chargers with your device.
Failure to use a Franklin Wireless approved battery and charger may increase the
risk that your device will overheat, catch fire, and/or explode resulting in property
damage, serious bodily injury, and/or death.
Battery life can vary based on the network, signal strength, temperature, features,
and accessories you use.
If you connect your device to your computer using a USB data cable, the battery
will charge.
It normally takes at least 3 hours to fully charge the battery with an A/C adapter.
New batteries or batteries stored for a long time may take more time to charge.
When charging your battery, keep it near room temperature.
Never expose batteries to temperatures below 32°F (0°C) or above 113°F (45°C).
Never leave the device in an unattended vehicle due to uncontrollable temperatures
that may be outside the recommended temperature range for this device.
It is normal for batteries to gradually weaken and require longer charging times. If
you notice a change in your battery life, it is probably time to purchase a new
battery.
2.3 Using a LAN cable (RJ45)
If you want to connect to RJ45 LAN cable to the R526, plug the cable to the RJ45 slot
located between Micro USB port and power button.
