PARTS
NOTE
Attach the Bottom
Pole
(D) on the groove
on the Base (C); then
secure it by using the
Plastic Nut
(K).
NOTE:
Make sure that the two
holes on the pole are
positioned on the
sides.
C
x1
D
x1
K
x1
STEP 1
3
ASSEMBLY INSTRUCTIONS
1. Remove all components from the shipping
carton. Remove all protective wrap and layout
all components on the ground.
2. Ensure you have all components shown in the
parts list.
GENERAL NOTE
PARTS
NOTE
STEP 2
Attach the Support
Arms
(G) on the Base
(C) by using 2pcs of
Bolts M8x20mm
(1)
through 2pcs of
Washers
(P) and 2pcs
of Nuts (O).
NOTE:
Do not fully tighten
bolts during this step.
It will allow for easier
assembly if they are
tightened later.
ITEM#:
For replacement parts:
Visit: www.franklinsports.com/91017X
Email: parts@franklinsports.com
Call: 1-800-225-8649
C
x1
D
x1
G
x2
O
x2
P
x2
1
x2
91017X 91017C1X
