3. Press to highlight Databank and press
ENTRER
.
4. Press to highlight Erase All Data and
press
ENTRER
.
5. Press Y to erase all the entries or N to
cancel the deletion.
9. Using a Password
You can use a password to keep the
information in the databank private. The
password is requested when the unit is
turned on and the databank is accessed.
9.1 Password Warnings
Warning! After you set the password, you
must enter the password to access the
databank for the first time during a session.
Always record your password and keep it in
a separate place. If you forget the password,
you must reset the unit to access the
databank.
Warning! Resetting the unit erases all user-
entered information. Always keep written
copies of your data. If you have a reset button,
use the end of a straightened paper clip to
gently press the reset button.
If you do not have a reset button, or if the
unit does not reset after pressing the reset
button, remove the batteries, wait at least two
minutes, and then re-install them. For battery
instructions, see “Replacing the Batteries”.
9.2 Password Setup
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press to highlight Databank and press
ENTRER
.
4. Press / to highlight Set Password
and press
ENTRER
.
5. Type a password and then press
ENTRER
.
• Your password can have up to eight letters.
• You are prompted to retype your
password.
6. Type your password again exactly as
you did the first time.
7. Press
ENTRER
to confirm and enable your
password.
• To test the password, press
twice
and press
MENU
.
Organizer
is highlighted.
Press
ENTRER
to select it. Press to
highlight
Databank
and then press
ENTRER
. You are then prompted to type the
password. Type it and press
ENTRER
.
• To disable the password, repeat Steps 1 to
4 above, and press
ENTRER
when “Enter
New Password” is displayed.
10. Setting the Clock
The clock lets you set a home time and view
local times around the world. You must set
the home time before viewing world times as
world times are based on home time.
10.1 Setting Home Time
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Clock is highlighted. Press
ENTRER
to
select it.
• You see the home time screen.
4. Press S to enter the setting mode.
5. Set Time Format is highlighted. Press
ENTRER
to select it.
• Press / to cycle through the 12- and
24-hour day/ month/year formats.Press
ENTRER
to save your selection.
6. Press to highlight Set DST and press
ENTRER
to select it.
• Press / to cycle between
DST On
or
DST Off
. Press
ENTRER
to select your choice.
7. Press to highlight Set Time and press
ENTRER
to select it.
• Press / until the current hour is
displayed.
• Press to move to minutes, then press /
until the current minute is displayed.
• Press
ENTRER
to set the time.
8. Press to highlight Set Date and press
ENTRER
to select it.
• Use / to move to the next or previous
field. Use / to scroll to the current day/
month/year. Press
ENTRER
to set it.
9. Press to highlight Set Home City and
press
ENTRER
to select it.
• Press / until your local city is
displayed. Press
ENTRER
to select it.
10.Press
ARR
to exit setting mode.
10.2 Setting World Time
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Clock is highlighted. Press
ENTRER
to
select it.
• You see the home time screen.
4. Press
ENTRER
to toggle between home
time and world time.
5. Press S to enter setting mode.
6. Press
ENTRER
to select Set DST.
• Press / to cycle between
DST On
or
DST Off
. Press
ENTRER
to select your choice.
7. Press to highlight Set World City and
press
ENTRER
to select it.
• Press / until the city you want is
displayed. Press
ENTRER
to select it.
8. Press
ARR
to exit setting mode.
11. Using Calculator
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press to highlight Calculator and press
ENTRER
.
4. Type a number.
• A-P will type numbers 0-9 automatically.
You can type up to 10 digits. To type a
decimal, press G(.). To change the sign of a
number, press W(+/-).
5. Press a math function key.
6. Type another number.
7. Press
ENTRER
.
• Or press F(%) to calculate a percentage.
To calculate ...
Press ...
reciprocals
Q(1/x)
squares
D(x2)
square roots
S(√x)
8. Press
EFF
to clear the current
calculations.
11.1 Using Calculator Memory
Try the following equation to practice using
the calculator memory: (32 x 12) - (8 x 8) = 320
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press to highlight Calculator and press
ENTRER
.
4. Press B(mc) to clear the calculator
memory, if necessary.
5. Type 32, press K(x), type 12, and then
press
ENTRER
.
6. Press X(m+) to add the result to
memory.
• m indicates when a number is stored in
memory.
7. Type 8, press K(x), type 8, and then
press
ENTRER
.
8. Press C(m-) to subtract the result from
the number stored in memory.
9. Press V(mr) to retrieve the number from
memory.
10.Press
EFF
to clear the calculator.
12. Using Metric Converter
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press to highlight Conversions and
press
ENTRER
.
4. Press / to select a conversion
category (e.g., Weights) and then press
ENTRER
.
5. Select a conversion (e.g., grams/ounces)
and then press
ENTRER
.
6. Type a number after one of the units.
• A-P will type numbers 0-9 automatically.
Press / to move between the lines.
Press
ARR
to delete a number.
7. Press
ENTRER
to convert.
8. Press
EFF
to clear the current
conversion.
12.1 Using Currency Converter
1. Press
MENU
.
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press to highlight Currency and press
ENTRER
.
4. Enter a conversion rate and then press
ENTRER
.
• The rate should be in units of the other
currency per one unit of the home
currency (
n
other/1 home). For example,
to convert between U.S. dollars and euros,
enter an exchange rate of 1.3374. This
means that 1.3374 euros is the equivalent
of 1 U.S. dollar.
5. Enter an amount for the home or other
currency.
• Press / to move between the lines. Use
ARR
to delete a number.
6. Press
ENTRER
to convert.
7. Press
EFF
to clear the current
conversion.
13. Changing the Settings
When using this dictionary, you can adjust
the message language, screen contrast, the
shutoff time, the type size and turn the
Learn
a Word
feature on or off.
1. Press
MENU
.
2. Press to highlight Settings and then
press
ENTRER
.
3. Press / to highlight Message
Language, Contrast, Shutoff, Type Size or
Learn a Word and then press
ENTRER
.
•
Message Language
determines the
language of the menus, prompts, and help