16
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning:
Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting your BOOKMAN
erases settings and information en-
tered into its built-in book, and in any
currently installed book cards.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to
gently
press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on your BOOKMAN.
Read its User’s Guide to find the
location of the reset button.
Optional Features
AC adaptor jack:
Some BOOK-
MAN models are equipped with a
standard 3.5 mm jack for use with a 9-
volt, 200-300 milliamp AC/DC adaptor.
This symbol indicates that the inner
core of the plug of an AC adaptor is
negative and that the outer part of the
plug is positive. If your AC/DC adap-
tor does not have this symbol, confirm
its compatibility at its place of pur-
chase.
Headphone jack:
Some BOOK-
MAN models also have a 3.5 mm ste-
reo headphone jack for use with a
standard impedance 8 Ohm headset.
Headphone
jack
AC adaptor
jack
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key,
ON/OFF
, or by removing/replacing batteries.
