14
Resetting Your BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below.
Warning:
Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in
book and in any installed book card.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to
gently
press
reset button on BOOKMAN.
The reset button is recessed in a pin-
sized hole on the back of the BOOK-
MAN. Look for it on the battery cover
or near the book card slot.
This unit may change operating modes
due to Electro-static Discharge. Normal
operation of this unit can be re-estab-
lished by pressing the reset key,
ON/OFF
,
or by removing/replacing batteries.
Book Card Care
LBS.
• Do not touch the metal con-
tacts on the book cards.
Caution:
Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not put excessive pressure
on the book cards.
• Do not expose the book cards
to heat, cold, or liquids.
