4
Installing Cartridges
Warning:
Never install or remove a
cartridge when BOOKMAN is on. If you
do, information that you entered in its
built-in book and in an installed cartridge
will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the car-
tridge with the notches in
the slot.
4. Press the cartridge until it
snaps into place.
Selecting Books
Once you have installed a cartridge in
your BOOKMAN, you must select which
book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press
or
to highlight the
book you want to use.
4. Press
ENTER
to select it.
➤
Resuming Where You Left Off
You can turn off BOOKMAN at any
screen. When you turn BOOKMAN
on again, the screen that you last
viewed appears.
➤
Removing Cartridges
Warning:
When you remove a
cartridge to install another, informa-
tion that you entered in the removed
cartridge will be erased.
