14
Book Card Care
LBS.
• Do not touch the metal con-
tacts on your book cards.
Caution:
Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not put excessive weight
on your book cards.
• Do not expose your book cards
to heat, cold, or liquids.
➤
Troubleshooting Tips
Check that your book cards are
installed correctly. Also check that
the metal contacts on the book
cards are dirt-and dust-free.
Resetting Your BOOKMAN
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key,
ON/OFF
, or by removing/replacing batteries.
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below.
Warning:
Pressing the reset button with
more then very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in
book and in any installed book cards.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to
gently
press
reset button on your BOOKMAN.
Summary of Contents for BOOKMAN QTS-2040
Page 20: ... Electronic Publishers ...
