3
6. Bluetooth Pairing
1. Press and hold button B for 5 seconds.
• Make sure the bracelet is switched off before
pairing.
• The display shows “Power On” and then
“Pairing”.
2. Turn on the Bluetooth feature of the phone
you want to connect with the bracelet.
• Select “FRANKLIN BRACELET” on your phone
for pairing.
• If a pairing code is required, use “0000”.
• When pairing is successful, the bracelet
beeps once, shows the message “Paired” on
the display, and vibrates once to indicate
successful pairing.
• The display shows the paired icon ( ) when
your phone is connected with the bracelet.
• The bracelet vibrates and shows the message
“Disconnected” when your phone is more
than 33 feet (10 m)
away. It will automatically
reconnect when your phone is within the
Bluetooth range again.
7. Setting Time
1. Press any button to show the time.
2. Press and hold button A until you see
“Time Format” on the screen.
3. Press button B to select between 12-hour
and 24-hour time displays.
4. Press button A .
• The hour time flashes.
5. Press button B to adjust the hour time.
6. Press button A .
• The minute time flashes.
7. Press button B to adjust the minute time.
6. Press button A when done.
• For 12-hour time display, the “AM” and “PM”
indications only show during time setting.
