If you are using this product for the first time,
follow these steps to install the batteries, turn
the product on and adjust the screen contrast.
1. Slide the battery cover off in the
direction of the triangle.
2. Place the four AAA batteries inside the
case, following the diagram.
3. Replace the battery cover.
4. Press ON/OFF.
A brief demonstration appears.
5. Press CLEAR to stop the demo.
Ready appears.
6. Press
or
repeatedly to adjust
the screen contrast.
You can adjust the contrast only at
Ready.
3
✓
Disabling the Demonstration
You probably do not want to view the
demonstration every time you turn on this
product. To disable the demonstration,
type
--D and then press ENTER. To re-
enable it, do the same.
Getting Started