The CWR-108 uses one CR2032 Lithium
battery that comes pre installed. The CWR-
206 uses four AAA (LR03) batteries. The
battery should be changed when the screen
contrast is too light even after adjustment.
Please have a small Phillips screwdriver at
hand before you follow the steps below.
CWR-108 battery replacement
1. Turn the unit off and turn it over.
2. Unscrew the back cover and slide it off
in the indicated direction.
3. Install a new battery, with its plus sign
(+) facing you.
4. Replace the back cover.
CWR-206 battery replacement
1. Turn the unit off and turn it over.
2. Unscrew the back cover and slide it off
in the indicated direction.
3. Install the new batteries, following the
pattern indicated on the inside of the
cover.
15
About the Batteries
cwr108/206_Rev.B.qx 2/28/03 10:03 AM Page 15