background image

 

10 

Safety and Notices 

The following topics address important safety precautions, general notes, and required RF exposure 
information for your mobile broadband device. 

Safety Precautions 

The following topics outline important safety precautions that must be observed when using your device. 

Important Notice 

Due to the nature of wireless communications, transmission and reception of data can never be 
guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant 
delays or losses of data are rare when wireless devices are used in a normal manner with a well-
constructed network, your device should not be used in situations where failure to transmit or receive data 
could result in damage of any kind to the user or any other party, including but not limited to personal 
injury, death, or loss of property. Franklin Wireless accepts no responsibility for damages of any kind 
resulting from delays or errors in data transmitted or received using your device, or for failure of your 
device to transmit or receive such data. 

Safety and Hazards 

Do not operate your device under the following conditions.   

●  In areas where blasting is in progress   

●  Where explosive atmospheres may be present   

●  Near medical equipment   

●  Near life support equipment, or any equipment that may be susceptible to any form of radio 

interference.   

In such areas, your device MUST BE POWERED OFF. Your device can transmit signals that could 
interfere with this equipment. 

Do not operate your device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, your 
device MUST BE POWERED OFF. When operating, your device can transmit signals that could interfere 
with various onboard systems. 

Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground. Your device 
may be used at this time if allowed by airlines. 

The driver or operator of any vehicle should not operate the device while in control of a vehicle. Doing so 
will detract from the driver or operator’s control and operation of that vehicle. In some jurisdictions, 
operating such communications devices while in control of a vehicle is an offense. 

Summary of Contents for LT70B












Reviews: