Using a Password
You can use a password to keep the
information in the Phone List private. The
password is requested when the unit is
turned on and the Phone List is accessed.
Password Warnings
Warning! After you set the password, you
must enter the password to access the
phone list for the first time during a
session. Always record your password
and keep it in a separate place.
If you forget the password, you must reset
the unit to access the phone list.
Warning! Resetting the unit erases all
user-entered information. Always keep
written copies of your data.
If you do not have a reset button located
on the back of your unit, remove the
batteries, wait at least two minutes, and
then re-install them. For battery
instructions, see “Installing the Batteries.”
If you have a reset button, use the sharp
end of a straightened paperclip to gently
press the reset button.