12
Using a Password
You can use a password to keep the information in the
Phone List private. The password is requested when the
unit is turned on the unit and the Phone List is accessed..
Password Warnings
Warning! After you set the password, you must enter the
password to access the phone list for the first time during a
session. Always record your password and keep it in a
separate place.
If you forget the password, you must reset the unit to
access the phone list. Warning! Resetting the unit erases
all user-entered information. Always keep written copies of
your data.
If you do not have a reset button located on the back of
your unit, remove the batteries, wait at least
two minutes,
and then re-install them. For battery instructions, see
Changing the Battery on page 22.
If you have a reset button, use the sharp end of a
straightened paperclip to
gently press the reset button.
If the unit does not reset after pressing the reset button,
follow the above instructions for removing the batteries.
Password Setup
1. Press
twice.
2. Use
to see
Set the password and press
ENTER
=
.
3. Type a password and then press
ENTER
=
.
Your password can have up to 23 characters.
4. To test the password, press
ON/OFF
twice, type the
password, and press
ENTER
=
.
5. To disable the password, repeat Steps 1 and 2
above, and press
ENTER
=
when
Enter password
appears.
