1) Schematic diagram
2) List of Components
No.
Name
Quantity
1
L-shape support
1
2
hold-nut
1
3
lamp
1
4
U-shaped fastener
1
5
built-in wire
1
6
power wire
1 (137in)
7
adapter (12V AC 500mA)
1
8
extended wire
1 (137in)
9
iron nail, screw and expansion tube
7
Note 1, 2,3,4,5,6,7,8 are wire connectors.
3) Assembly process
1.
Determine installation site
It is suggested to install at the height of 71in from the
ground to get the best view angle;
The installation must allow for the power wire to run
into the house through gaps of windows or doors to
avoid the adapter and main power supply to be
dampened and cause danger.
2. Install L-shaped support
Method A
: See above figure to apply the lamp with
only one iron nail (if
you’re not able to use an iron nail
due to the wall materials, use the screw expansion
tube instead). The advantage of this method is that it
can reduce damages on the wall surface If there has
been an iron nail (or a screw) on the wall already, it
only needs to adjust the length slightly. The
disadvantage of this method is that the lamp may be
swayed by the external force and is not very sturdy.
Therefore, this method is appropriate for the places
where it cannot be influenced by the strong wind or
human touch. The specific method is: to fix the
supplied iron nail (or screw + expansion tube) on the
wall surface which shall be 2-3mm away from the cap
of the iron nail (or screw) so that the lamp can be
suspended on it as shown in the following figure.
Then use two screws to fix U-shaped fastener (4) into
L-shaped support (1):
Connect the plug (4) of power wire (6) with the socket
(3) of built-in wire (5) and then suspend L-shaped
support (1) on the wall.
Method B
: if the lamp holder is easy to be effected by
Caution
This product (especially the lamp holder) is
fragile, do not exert too much strength or drop it
during the assembly and use. Be sure to fix it on
the wall securely.
Please assemble it in strict accordance with
the steps and requirements specified in the
instruction to ensure safety and reliability
during the installation.
