ICA700 Rev0707
7
Figure 3. ICA700 Wiring
Station 2
Use a Splitter Cable as
Necessary for More Than
Two Station Configuration
Station 1
Typical
Two-Station
+12 VDC
GND
Note:
Supply power
to one station only.
Use Extension Cable for
three station or another
Splitter Cable as necessary.
Station 4
Station 3
The aerial station option provides seperate power input cables for each station so
that only two wires are required between stations for the communication signal.
Aerial Wiring
+12 VDC
GND
+12 VDC
GND
Two wires are required when
wired through an aerial turntable.
