TH4C Installation Guide
p. 29
TH4C Basic Configuration
© Safe Fleet | May 2019 | All rights reserved
Document Number: XE-SNB2-TH4CPM-R0A
Quality
Leave channel resolution at the default setting unless you have
special requirements.
This sets the recording resolution (in pixels). Higher resolution
reduces the amount of video (recording time) that can be stored.
SD source:
[720x480], 720x240,
360x240
1MP source:
[1280x720], 640x360,
320x180
Audio
Leave ON unless the camera is mounted on the exterior of the
vehicle, or if you have special requirements.
Setting Audio ON enables audio recording for the input channel. Turn
OFF Audio for unused camera channels.
[ON], OFF
Apply CH1
to All
Click to apply settings selected for Channel 1 to all cameras.
n/a
Camera
Advanced
Click to access the Camera Advanced tab and adjust settings for
each camera with CoC (Control over Coax).
n/a
Configuring Signals
The DVR supports 10 independent signals. The first five are dedicated input wire (signal harness) connections: LT (left turn
signal), STP (stop), BRK (brake), WRN (warning lights), and RT (right turn signal).
The last five can be set for other functions, such as an excessive speed event or when the installed G-sensor exceeds a threshold.
When a signal is activated, the associated 3-character label appears on-screen during video playback. For
example, "BRK" appears when the brake pedal is applied. For more information, see Metadata Details in
TH4C Configuration: Title/Display Menu
It is important to understand that you can also search video for signal events. For example, you can find
every instance when the warning lights were activated. For more information, see the
View User Guide
and
TH4C Administration: Working with Video
.
TIP: DVR Recording Limitations
i
Summary of Contents for TH4C
Page 2: ......
