M
aurice Pincoffs Canada © 2011
10
Monitor instruction
The cycle is a self-generating power system. The monitor will only function while you are
pedaling. Once you stop pedaling the monitor will shut off after 30 seconds. All values will be
reset to zero except for your saved user programs.
You will need to start pedaling before 30 seconds to keep your inputted data.
FUNCTION BUTTON
ENTER:
Turn the red button to select functions between manual mode, Program mode,
user mode, target heart rate control mode, time, speed, distance, watt, rpm,
calories and pulse.
Turn to set your target values; clockwise to increase, counter-clockwise to
decrease.
Press to accept the functions or target value.
Turn to increase or decrease the tension level.
TOTAL RESET:
Press to reset all values to zero.
RESET:
Press to rest target values to zero.
RECOVERY:
Press to have the recovery heart pulse grade with F1 to F6 readout
QUICK START
Press to start the manual mode program.
LAP / LEVEL
Press to select the display of lap or tension level
START/PAUSE: Press to start or pause your exercise program. Note: If you do not pedal, the
monitor will turn off after 30 seconds and you will lose all data.
