background image

WARRANTY

INFORMATION 

Stochastic Process Technology Group Limited provides a 

limited warranty for your in-home, indoor, non- commercial 

use of the Freebike. A complete description of the terms 

and conditions of the limited warranty, including the scope 

of coverage, applicable warranty periods, and certain 

important exclusions and limitations, can be accessed at: 

www.freebeatfit.com/warranty

MAINTENANCE

& CARE

SADDLE: 

Make sure the saddle is parallel to the ground. 

Then use the included 13mm wrench to tighten the 

seat-fixing nuts on both sides.  

EVERY 3 TO 5 RIDES SECTION

To ensure safe operation and optimal performance, check 

for wear and damage and perform maintenance on a 

regular basis. Replace any damaged or defective parts 

immediately. Do not use the bike until the repair is 

performed for safety reasons. Only use original parts from 

the manufacturer. Changes or modifications to this unit not 

expressly approved by freebeat could void the warranty.

CLEANING: 

Wipe down the bike using a damp cloth. 

LEVELING FEET: 

If the bike is unstable and rocks back and 

forth, turn each leveling foot below the stabilizers clockwise 

(when viewed from above) until it rests firmly on the 

ground. 

AFTER RIDES 

CLEANING:

 

Clean the bike thoroughly using a damp cloth 

and a mild household cleaner diluted in water. Clean the 

touchscreen using an electronics wipe. 

PEDALS:

 

Tighten any loose pedal with the included 

wrench. Pedals should be tightened to 25 lb-ft of torque. 

Turn clockwise to tighten the right pedal and counterclock-

wise to tighten the left pedal. 

EVERY 4 TO 6 RIDES 

CAUTION:

 

Service other than the procedures described 

here must be performed by an authorized technician. 

EMERGENCY BRAKE:

 

Test the emergency brake by 

pressing down on the resistance knob while pedaling 

slowly. The flywheel should come to a complete stop 

immediately. If it does not, stop using the bike immediately 

and contact freebeat support. 

FRAME:

 

Check the entire frame for signs of wear and 

damage, and tighten any loose screws and bolts.

EVERY 15 TO 20 RIDES SECTION 

PEDALS:

 

Replace pedals if necessary. Tighten new pedals 

to 25 lb- ft of torque.

For further instructions, see

 

www.freebeatfit.com

ANNUAL MAINTENANCE 

Your hands should rest comfortably on the handlebars 

without reaching. Your arms should be slightly bent at the 

elbows.

Your leg should be slightly bent at the bottom of the stroke. 

Adjust accordingly if not as described.

RECOMMENDED BODY POSITIONING 

Summary of Contents for LIT BIKE
















Reviews: