freebeat LIT BIKE, User Manual

Screw part G Water Bottle Holder into 

part D Handlebar Riser with Phillips 

Pan Head Screws (part L2). 

STEP 2

Carefully attach part D Handlebar 

Riser with main bike frame and 

connect Computer Upper Cable with 

Computer Lower Cable (removed the 

black string).

STEP 3

Once the cables are connected and Handle 

Riser (part D) is attached to the main frame 

(part A), find part H Weight Selector Pin and 

insert into the screwhole and adjust the riser 

tube to a suitable height.

* If the data chord is unsteady: part H Weight 

Selector Pin and part D Handlebar Riser in 

the front end of the main frame needs to be 

unscrewed and readjusted and tightened 

again. 

STEP 4

D

G

L2

H

D

A

4mm

E

D

STEP 5

Fit the handlebar post (part D), onto the 

handlebars (part E), push the handlebars from 

behind in place. Add two Hexagon Socket Head 

Bolt (part L3) and bolt them to the front of the 

handlebar post. Screw them in with a 4mm 

Allen wrench. Make sure the screws are fully 

tightened and secured.

*Suggest to use short side of 4mm Allen wrench, 

and use long side as the bolts are tighter.

α

β

D

A

L3

L8

L7