18
19
ASSEMBLY INSTRUCTIONS
STEP 2
a.
Cut off the protective tie on the riser tube, insert
the riser tube into the front tube of
①
mainframe, then
switch to the STOP line. Place
㉑
into the
φ
9 small hole
on the front tube and lock in; and adjust the riser tube
to a suitable height. Then rotate and lock the L-shaped
latch lock.
STEP 3
a.
Install the left and right pedals
⑪
&
⑫
on the left
and right cranks respectively on
①
mainframe.
b. R is marked on the axle core of the pedal on the
right side, and R is also marked on the crank. Please
double check and lock it clockwise to install.
c.
L is marked on the axle core of the left pedal, and
L is also marked on the crank. Please double check and
lock it clockwise to install.
stop
stop
L
ASSEMBLY INSTRUCTIONS
STEP 4
a.
Take out
⑧
the seat cushion and install it on
①
mainframe. Adjust the angle and lock in.
b. Install
②
the dumbbell rack to the back of the
cushion tube of
①
mainframe, and lock it with
㉓
Allen
screw, round head and
⑱
washers.
①
㉑
⑪
①
⑧
②
①
㉓
⑱
①
