20
21
ASSEMBLY INSTRUCTIONS
STEP 5
a.
Put
⑦
L bracket close to the bottom of
①
, and
pass the power and data cords through the tube. Take
out the cords from the hole in the middle of the
⑦
L
bracket. Then put the
⑤
faucet handle close to the
top of the riser. After the holes are aligned, use four
⑳
hexagon socket screws and
㉒
washers to fix and lock
in.
ASSEMBLY INSTRUCTIONS
STEP 6
a.
Align
⑥
on the back of
⑦
L bracket, and insert a
piece of
⑰
damping pads on both sides. Use
⑱
washer,
⑮
locknut, and
⑯
Allen screw to lock in.
STEP 7
a.
Insert the power plug into the socket with a
lightning mark. Insert the data cable plug into the
socket with the usb logo.
b. Rotate the lower cover of the
⑨
mobile phone
holder by 90 degrees, and have the openings align with
the side of
⑦
L bracket. Rotate back to center, and push
forward to
⑤
handrail and fit into
⑩
tube upper cover.
Align the lower cover at the center of the faucet handle
on both sides and lock with
㉔
Philips screw, round
head.
⑦
⑦
①
⑤
⑤
⑩
㉔
⑥
⑥
⑱
⑯
⑮
⑥
⑦
⑦
⑤
⑳
⑨
㉒
⑨
⑰
⑰
