6
Connect to External AV Device
EN
6
Chapter 6: Connect to External AV Device
6.1 Connect Video Cable
Freecom MediaPlayer supports 4 types of video output; "Composite, S-video, Component,
DVI". Use the video connection that your TV supports. Normally, TV supports composite
video connection, and this package includes composite video cable.
When you can not see normal screen after connecting video cable, check
following:
1. "TV "– Switch to Video Input Mode: Turn on TV, and switch to video input mode same
as video connection. See TV user manual.
2. "Freecom MediaPlayer" – Switch to Video Output Mode: Press "TV OUT" button
repeatedly. Whenever "TV OUT" is pressed, the video output signal changes.
3. When a normal screen appears, save the configurations of the Freecom MediaPlayer.
See "6.3.1 Video Setup".
Connect to Composite
(CVBS) Jack of TV
S-VIDEO
Connect S-Video Jack of TV
Yellow
(CVBS)
Yellow
(CVBS)
Red
(Pr)
Blue
(Pb)
Green
(Y)
Connect Pr Jack of TV
Connect Pb Jack of TV
Connect Y Jack of TV
Red
(Pr)
Blue
(Pb)
Green
(Y)
1. Composite: Yellow RCA cable. (Supplied)
2. S-Video: Black rounded cable (not supplied)
4, DVI : DVI Cable (not supplied)
3. Component: Y, Pb, Pr component cable (not supplied)
•
•
•
•
•
Connect DVI Jack of TV
DVI
•
•
•
•
•
•