EN
6
Network Storage Center / Network Media Center Functions
6.1.4 Configure the network settings
Go to Configuration -> Configure the network settings.
When selecting "Configure the network settings", the Network Address Wizard will open.
Click on "Begin Wizard" to start the network configuration.
You may configure the network settings either automatically or manually.
Automatic configuration
When selecting "Automatic", the Freecom Network Storage Center / Network Media
Center will obtain an IP address automatically from a DHCP server (usually from your
router). Click on "Next" to proceed.
In the next step, click on "Finish". Your Network Storage Center / Network Media Center
will be rebooted afterwards.