EN
1
Hardware Installation
1. Reset button
The Reset button has different functions, depending on how long the button is
pressed:
Press "Reset"
LED Status
Action
button for
1 - 3 seconds
white LED blinking slowly
Hardware will be resetted, all user
and networks settings will be kept
4 - 7 seconds
white LED blinking fast
Device is shut down
8 - 9 seconds
white LED off
No action, "Reset" button can
be released now without any
action to be done
10 - 15 seconds white LED blinking very fast
Network settings are set to
factory default:
- IP address = DHCP
- Administrator password =
admin
- Host name = NetworkCenter
- Workgroup name =
WORKGROUP
Note: all user settings will be kept!
> 15 seconds
white LED off
No action, "Reset" button can
be released now without any
action to be done
1.4 Footstand
Use the two rubber foot stands that come with the device to place the Network Storage
Center / Network Media Center in upright position.