background image

46 

 

Freedom Designs, Inc. 

              

Freedom 2 / Freedom 2 Kids 

 

Freedom 2 

&

 Freedom 2 Kids  

Limited Warranty 

 

Freedom Designs, Inc. warrants the 

Freedom 2 

or

 Freedom 2 Kids

 frame and quick release 

axles on all models against defects in material and workmanship for a lifetime of the original 
purchaser. 
 
All manufactured and distributed parts and components, (including frame components, axle 
plates, caster plates, armrests, backrests, etc.), are warranted against defects in materials and 
workmanship for one year from purchase date. Those items not warranted are all tires and tubes 
and push handle grips. 
 
Freedom Designs, Inc. will repair or replace parts as required, provided that the authorization 
for such a return has been acquired by an established Freedom Designs, Inc. dealer and that the 
parts in question are returned by the Freedom Designs, Inc. dealer, fully insured with freight pre
-paid, To Freedom Designs, Inc., 2241 Madera Road, Simi Valley, CA. 93065, within the 
prescribed period of warranty. Labor charges incurred in the installation or repair of the above 
mentioned parts, plus all freight charges are not included in the warranty. 
 
Freedom Designs, Inc. will not warranty any parts damaged by improper installation and/or  
repair on the part of the individual owner, neglect, accident or misuse, nor those parts altered or 
serviced by an agency not authorized by Freedom Designs, Inc. 
 
Freedom Designs, Inc.’s sole liability extends to repair or replacement of parts or components 
as previously specified. The foregoing is in lieu of all warranties, expressed, implied or statu-
tory, whether written or oral. Warranty applies in the U.S. only; Check with Freedom Designs, 
Inc.’s distributor regarding international warranties. 

Summary of Contents for Freedom 2















































Reviews: