background image

 

 

Freedom Designs, Inc. 

                                                      

Gizmo

 

WARNING: FALLS & TIP-OVERS

 

Center of Balance 

The point where this chair will tip forward, back or to the side depends on its 
center of balance and stability. How your chair is setup, the options you select 
and the changes you make affect the risk of fall or tip-over. 
1.  The Most Important Adjustments Are: 
 

a.   The position of the rear wheels. The more you move the rear wheels 

 

 

forward, the more likely your chair will tip over backward. 

2.  The Center of Balance is Also Affected By: 
 

a.  A change in setup of your chair, including: 

 

 

1.  The distance between rear wheels. 

 

 

2.  The amount of rear wheel camber. 

 

 

3.  The seat height, seat angle and position on frame. 

  4. 

Backrest 

angle. 

 

b.  A change in your body position, posture or weight distribution. 

 

c.  The use of a back pack or other options, and amount of added weight. 

3.  To Reduce the Risk of an Accident: 
 

a.  Consult your doctor, nurse or therapist to find out what axle and caster 

 

 

position is best for you. 

 

b.  Consult your authorized Freedom Designs, Inc. dealer BEFORE you

 

 

modify or adjust this chair. Be aware that you may need to make other 

 

 

changes to correct the center of balance. 

 

c.  Have someone help you until you know the balance points of your chair 

 

 

and how to avoid a tip-over. 

 d. 

Use 

anti-tip 

tubes. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss 
of control may occur and cause severe injury to the rider or others. 
 
Dressing or Changing Clothes 
 

Your weight may shift, if you dress or change clothes while seated in this chair. 

To reduce the risk of a fall or tip-over: 
1.  Rotate the front casters until they are as far forward as possible. This makes 

the chair more stable. 

2.  Lock anti-tip tubes in place. 
3.  Lock wheel locks into place. 

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss 
of control may occur and cause severe injury to the rider or others.
 

 

Wheelies 

“Wheelies”, (tilting the wheelchair backward to its balance point), are extremely 
dangerous, as the chair may tip over. Freedom Designs, Inc. recommends that 
“wheelies” not be attempted. 



!

 

Summary of Contents for Gizmo Folding Tilt

















































Reviews: