ONYX Deskset XL
User’s Guide
43
ONYX Remote Control Tether
Use the coiled tether to secure the remote control with the ONYX. This flexible tether makes it
less likely that you will lose or confuse your remote control with another remote control.
Note:
Give careful thought to where you want to attach the two plastic anchors. The adhesive
securing the anchor is very strong. Repositioning an anchor will be very difficult once it is
in place.
1.
Determine where you want to affix the tether to the ONYX base plate. See the following
illustration for an example.
2.
Peel away the paper from the adhesive tape on the bottom of the anchor that is attached
to the coiled tether.
3.
Place the anchor on the base in the predetermined location.
4.
Next, o
pen and connect the coiled tether’s clasp to post on the remote control.
