48
Problem
Solution
The unit does not power
on.
Ensure that the remote control is working. The red LED in the top
center of the remote control flashes when a button is pressed. If
this does not happen, verify that the remote control is plugged in to
the unit.
Make sure that the USB 2.0 cable (white inner connector) is
connected to the USB 2.0 port (white inner connector with two
raised dots) on the back of the unit.
When connected to a power outlet, ensure that the power outlet
has power and is not malfunctioning. If the outlet is connected to a
wall switch, make sure the switch is on.
When connected to a computer, ensure that the computer is
powered on.
The Power LED is
yellow, but the unit does
not power on.
Verify that the USB 2.0 power cable (white inner connector) is
connected to the USB 2.0 power port and not the USB 3.0 video
port (blue inner connector) on the back of the unit.
Summary of Contents for ONYX Portable HD
Page 6: ......