52
Problem
Solution
When moving the
camera to a new
position, the previous
position’s settings are
lost.
This is normal operation since camera settings are saved based
on the camera position. For example, if you have reading lines
turned on for distant viewing, and then change the camera to
reading or self-viewing, the reading lines will not appear unless you
set them for that camera position.
Nothing happens while
pressing buttons on the
remote control.
Verify that the red LED on the remote control flashes when you
press a button. If not, make sure the remote control is plugged in
to the back of the unit.
The unit’s settings are
different after powering
on the unit.
The last settings used are not kept if you power off the unit by
unplugging the USB 2.0 power cable. It is recommended that you
power off the unit using the remote control.
Summary of Contents for ONYX Portable HD
Page 6: ......
