20
Turning LED Lights Off
When you power on RUBY 7
HD
, the LED lights also turn on. To avoid glare when viewing
reflective surfaces, you can turn off the LED lights.
1. Press and HOLD the green/yellow
Power
button
, and then press the red
Freeze
Frame
button
. The LED lights turn off.
2. To turn the lights on again, press and HOLD the green/yellow
Power
button
, and then
press the red
Freeze Frame
button
.
Using Reading Line or Reading Masks
The reading line is a horizontal line that displays on the screen. Reading masks block part of
the screen to show a horizontal slice of the screen. Use these items to help you locate and
maintain your place while viewing an image.
Note:
When using the button sequence as described in this procedure, the unit cycles
through displaying the reading line, the reading masks, and then no reading line or
masks.
